Adamite Rol supplier in India | Kathuria Techmech

ADAMITE ROLLS

Adamite Rolls are basically alloy steel rolls (a kind of high carbon steel) having hardness ranging from 40 degrees shore c to 55 degrees shore c with carbon percentage ranging from 1.35% to 2%. These rolls are primarily supplied for initial stands, where wear resistance is important along with considerable strength and toughness.

Because of certain special heat treatment technology, its high wear ability, good toughness and excellent resistance to fire crack, makes it ideal rolls for roughing stands.

APPLICATIONS
ROLLING MILLS	MILL-TYPE	STAND CONDITION	PASS CONDITION
Heavy, Medium and Light Section, Beams, Rail and Bar Mills	2 and 3 Hi or Universal	In all stands (Rough, Intermediate and Finish)	In case deep or light groove pass, low reduction and low RPM.
Medium and Narrow Strip TMT and Wire Rod Mills	2 and 3 Hi	Only on Roughing Stand
Heavy, Medium and Light Section Mills	Can be used for Straightening Rollers (Reels)

CHEMICAL COMPOSITION
Material	Symbol	Carbon Adamite	Alloy Adamite	Alloy Adamite	Alloy high Carbon Adamite	Alloy high Carbon Adamite	Alloy high Carbon Adamite
Code		AD140	AD150	AD160	AD180	AD190	AD200
Chemical Composition (%)	C	1.10-1.40	1.40-1.60	1.50-1.70	1.70-1.90	1.80-2.00	1.90-2.10
	Si	0.30-0.60	0.30-0.60	0.30-0.70	0.30-0.80	0.30-0.80	0.30-0.80
	Mn	0.70-1.10	0.80-1.30	0.80-1.30	0.60-1.20	0.60-1.20	0.80-1.20
	P	≤0.035	≤0.035	≤0.035	≤0.035	≤0.035	≤0.035
	S	≤0.030	≤0.030	≤0.030	≤0.030	≤0.030	≤0.030
	Cr	0.70-1.50	0.80-2.00	0.80-2.00	0.80-1.50	1.50-3.50	0.60-2.00
	Ni	0.20-1.00	0.20-2.00	0.20-2.00	0.50-2.00	1.00-2.00	0.60-2.50
	Mo	0.20-0.50	0.20-0.60	0.20-0.60	0.20-0.60	0.20-0.60	0.20-0.80

PHYSICAL COMPOSITION
Hardness Range (Shore °C)	Tensile Strength (N/mm²)	Bending Resistance
30°C - 60°C	350 – 700	600-1100

ADAMITE ROLLS

Contact Us